Features of the Pro-1200W Whistler Power Inverter:
- Full Output Power - Other inverters have reduced output over time.
- 3 AC Outlets - 1 USB Port
- Maximum Continous Power - 1200 watts
- Maximum Surge Capability (Peak Power) - 2400 watts*
- No Load Current Draw - <1.0A
- Wave Form - Modified Sine Wave
- Operating Input Voltage Range - 11-15+0.5 volts DC
- Mountable
- High Surge
- Overload Indicator
- Thermostat Controlled Cooling Fan
- Digital Battery Volt/Watt Meter - Monitors input volts and output watts
- Remote Operation Jack
- Ground Fault Sensing
*Under certain conditions your Pro-1200W inverter may provide up to 2 times the continuous rating for a brief period.
Electronic Circuit Protection
- Overload Protection – Inverter will automatically shut down if load exceeds inverter rating.
- Smart Surge Control - Inverter will attempt to start loads above the continuous rating for up to 10 seconds.
- Voltage Protection - Whenever the input exceeds 15 volts DC or is less than 10 volts, the inverter will automatically shutdown.
- Short Circuit Protection - Automatically shuts down until short circuit is removed.
- Thermal Cutoff - Automatically shuts down if internal temperature exceeds safe design parameters.
120 Amp Power Requirement - at rated output
Unit Specifications:
Size = 8.9"L x 7.4"W x 3.54"H
Weight = 5.42 lbs
Warranty = 2 Years
When the Pro-1200W and the battery are set up within three feet of each other, use a minimum of #4 gauge wire to make the connections. Within four to six feet, use a minimum of #2 gauge wire. At distances between six feet to ten feet, use #0 gauge wire. |