This high efficiency microprocessor controlled DC-AC inverter converts 12 Volts DC (Nominal) to 1000 watts of pure sine-wave AC power at 100/110/120 Volts, 50/60 Hz. The unit comes with in-built 16 Amp transfer switch and a 12 Amp circuit breaker. Input battery cable lugs are provided and the AC output is obtained through hardwire connection.
- Overload, short circuit, over-temperature, under & over voltage protections
- Low power saving mode to conserve energy
- The unit is e-13/ CE / FCC approved and the safety standards of the unit conform to UL-458 specifications.
- Load control cooling fan
- Advanced microprocessor
- Built in transfer switch and AC Circuit breaker
- Low power saving mode to conserve energy
- Input and output fully isolation
- Output frequency 50/60 Hz switch selectable
- ROF (remote override function) or ignition lockout function option
- Speed up transfer time and synchronized operation with utility AC source
- True sine wave output (THD < 3%)
|
|
| Model# |
Input Voltage |
Output Voltage |
Dimensions |
Output |
Fuse Rating |
Weight |
| ST1000-112 |
10.5 ~ 15 VDC |
120 VAC +/- 3% |
14.7 x 9.29 x 4.53 |
1000 Watts |
n/a |
13.6 lbs |
| Applications |
Service vehicles
Mobile Offices
Boats
Recreation Vehicles, Camping
Telecommunication
Field work / Construction sites
Solar power systems
Emergency backup power
Home electronics: TV, VCR, video games
Computers, printers |
| Design Features |
16 Amps transfer switch
12-14 millisec transfer time
12 Amps circuit breaker
Pure sine wave output(THD <3%)
50/60Hz switch selectable output frequency
Input and Output fully isolation design
Low power saving mode to conserve energy
Loading controlled cooling fan
Advanced microprocessor
Short-circuit, over-voltage, under-voltage protection
over-temperature, over-load protection
Meets UL458 (but is not UL listed)
Operating Temp. range 0~40C | |